Products
Steeda Focus ST Aluminum Cold Air Inlet Tube Intake (2013-2014)
$238.61
Replaces your entire inlet system Lightweight aluminum design Keeps air intake temps down Direct bolt on replacement Up to 5 more horsepower above what our... View full product details
Steeda Focus ST/RS Throttle Body Spacer (2013-2018)
$117.69
Increased horsepower and torque: 6 hp and 11 ft/lbs tq! Increased fuel economy Made from high-quality billet aluminum Made from Billet 6061 aluminum, it is... View full product details
Steeda Focus/Fusion Sport Replacement Cone Filter Element
$112.35
This is the same Cone Filter Element that is included with all of Steeda's four cylinder Fusion Cold Air Intakes. Having a spare filter element... View full product details
Steeda Fusion Twin Turbo Cold Air Kit (17-20 Sport)
$629.15
Product Benefits More Horsepower and Torque No tuning required Better gas mileage Reusable, cleanable filters Lifetime warranty When Ford released the awesome new Twin Turbo... View full product details
Steeda ProFlow Blow Off Valve Adapter EcoBoost Mustang/Fusion/Maverick (2015-2022)
$123.05
Releases excess boost pressure to the atmosphere Converts the factory re-circulation valve into a blow off valve CNC machined in-house out of Aerospace Grade 6061... View full product details
Steeda ProFlow Mustang Cold Air Intake Kit - Automatic GT (11-14), No tune required
$948.02
Does not get heat soaked like factory air box Cools to ambient temperature range significantly faster than the stock unit while producing more power Allows... View full product details
Steeda ProFlow Mustang Cold Air Intake Kit - Manual GT (11-14), No tune required
$948.02
Does not get heat soaked like factory air box Cools to ambient temperature range significantly faster than the stock unit while producing more power Allows... View full product details
Super Victor EFI (8.2)
$758.62
Designed For Engines With An 8.2 Inch Deck Height Includes Nitrous And Rear Cooling Water Bosses Single plane, high rise intakes designed for maximum race... View full product details
Supercharger Kit 2.9L (Black Finish)
$6,376.12
Fits under factory hood without modification Runs cooler than factory supercharger Factory fit and finish If your craving more power from your Shelby GT500,... View full product details
Symposer Delete w/ Boost Port
$67.40
Direct bolt on installation All hardware included Easily return vehicle back to stock This simple plate allows you to delete the sound symposer from your... View full product details
Threaded IAT/ACT Sensor
$96.29
Thread in style OEM motorcraft part If you have a custom supercharger/turbocharger set up and need to relocate your IAT sensor, this is what you... View full product details
Throttle Body (62mm)
$748.99
Limited 1 Year Warranty 7-12 HP depending on vehicle and application. 356 aluminum castings o ringed throttle shafts All BBK 1996-2001 Mustang Cobra throttle bodies... View full product details
Throttle Body (70mm)
$318.85
Limited 1 Year Warranty 7-12 HP depending on vehicle and application CNC machined from high quality 356 aluminum OEM quality and fit every time All... View full product details
Throttle Body (75mm)
$362.72
CNC Machined From High Quality 356 Aluminum Castings 7 to 12 Horsepower depending on vehicle and application O-Ringed throttle shafts BBK throttle bodies are designed... View full product details
Throttle Body (75MM)
$452.60
Better Air Flow for More Power Exceptional Quality 6061-T6 billet aluminum Accufab has become the standard for top racers in many different types of racing.... View full product details
Throttle Body (Polished)
$763.97
Better Air Flow for More Power Exceptional Quality The 75mm is available as a Standard or MAX Version. The 70mm is available as a standard... View full product details
Throttle body and EGR Spacer (70mm)
$481.49
Limited 1 Year Warranty 356 aluminum castings CNC machined 7-12 HP depending on vehicle and application All BBK 1986-1993 Mustang throttle bodies are designed to... View full product details
Throttle Body and Plenum Combo (Polished 70mm)
$796.07
11 additional horsepower, 70mm and 75mm throttle bodies additional torque and no loss to bottom end performance The Accufab Mustang GT Throttle Body & Plenum... View full product details
Throttle Body Elbow (70MM)
$213.99
They must be used with Edelbrock 65mm, 70mm The powder-coating is titanium gray 50-state street legal These adapters are required to install Edelbrock 5.0L manifolds... View full product details
Throttle Body Spacer
$219.34
Precision Machined From Solid T-6061 Billet Aluminum Serrated Entry: Reduces Annoying Whistling Sound Limited 2 Year Warranty Silver Bullet throttle body spacers create turbulence in... View full product details
Throttle Body Spacer
$123.05
High quality construction Increased horsepower and torque Increased fuel economy Made from quality billet aluminum Made in the U.S.A. with pride Steeda's patented billet aluminum... View full product details
Throttle Body Spacer (Billet)
$146.58
Increased horsepower Increased gas mileage Solid billet aluminum construction Steeda's Patented Billet Aluminum intake spacer is designed specifically for the 2011 and up V6 Mustang.... View full product details
Throttle Body Spacers (3.5L Ecoboost)
$185.10
Limited 2 Year Warranty Serrated Entry: Reduces Annoying Whistling Sound 16hp and 17lbs. x ft. torque T-6061 Billet Aluminum Construction Longer Intake Track Silver Bullet... View full product details
Throttle Body Spacers (5.0)
$202.22
Limited 2 Year Warranty Serrated Entry: Reduces Annoying Whistling Sound Combination Serrated/Helix Design Creates Turbulence Precision Machined From Solid T-6061 Billet Aluminum Silver Bullet Throttle... View full product details
Throttle Body Spacers (5.4)
$158.35
Serrated Entry: Reduces Annoying Whistling Sound Limited 2 Year Warranty Combination Serrated/Helix Design Creates Turbulence Precision Machined From Solid T-6061 Billet Aluminum Silver Bullet Throttle... View full product details
Throttle Body Spacers (5.4L)
$185.10
Serrated Entry: Reduces Annoying Whistling Sound Espec Combination Serrated/Helix Design Creates Turbulence Precision Machined From Solid T-6061 Billet Aluminum Limited 2 Year Warranty Helix Design... View full product details
Throttle Intake (78 mm)
$534.99
Add 10-15 RWHP & 10-15 RWTQ 356 aluminum castings Kit comes complete with all the necessary hardware Another Design and Patented Performance first from BBK... View full product details
Turbo Blanket Insulation Kit
$128.39
complete kit includes a roll of exhaust wrap reduce turbo lag and under hood temperatures The DEI turbo blanket kit is a very nice complete... View full product details
Twin Turbo System
$11,459.69
61mm Turbonetics Turbochargers- Standard No cuttng of the body required No hood of spacking of the k-member required Easy Installation 600-1000 HP Capable with the... View full product details
V3 Tuner Kit (Intercooled, Satin)
$13,168.49
10 psig @ redline on stock engine High flow replacement fuel injectors 255 lph High-flow quality roto-molded ducts 98 mm MAF meter housing and filter... View full product details
Velocity Cold Air Intake (carbon fibre)
$759.69
Largest horsepower and torque gains on the market Lifetime filter can be reoiled and reused Keeps hot air out, cold air in Lightweight Steeda has... View full product details
© 2024 Steeda. All trademarks and registered trademarks are the property of their respective owners.