Products
Front Swaybar (26mm)
$412.85
26 mm front swaybar 134 percent stiffer Steeda's 26 mm front swaybar is designed for the 2006 and up Ford Fusion. It will also fit... View full product details
Front Swaybar Spacer Kit
$128.80
Re-use the factory end link bushing 28% softer 11.8 lbs Full 1.375" diameter for superior handling, flatter cornering and better stability. Steeda's 555-1087 bar is... View full product details
Fuel Injector Set (80LB/HR)
$854.44
May require adaptor harnesses on certain applications flow rates are quoted at a delta pressure of 39.15 psi M-9593-LU80* 80 lbs./hr. EV6 11-12 ohms USCAR.All... View full product details
Fuel Pressure Gauge (Cobalt 2 1/16 Full Sweep Electric)
$436.99
Range: 0 - 100 PSI Range: 0 - 100 PSI Notes: Full Sweep, Stepper Motor meter movement. Includes 1/8" NPT Sender. : 2 1/16" (52.4mm)... View full product details
Fuel Pressure Gauge (Electric Ultralite 2 1/16)
$402.49
Powered by digital microprocessor controlled, rugged stepper motor drives and laboratory grade sending units, full sweep electric gauges are the best gauges available. Powered by... View full product details
Fuel Rail (Kit for 29285)
$287.49
CNC-machined from aluminum Flow-through design Designed for Edelbrock EFI manifolds CNC-machined from aluminum extrusions, these Edelbrock aluminum fuel rails have a flow-through design and fittings... View full product details
Fuel Rails
$599.14
Same height profile as OEM rail Integrated mounts for safe/reliable injector seating Two 1/8 NPT ports for external fittings Supports return/returnless systems The finest fuel... View full product details
Gen1 Rear Valance
$493.34
Fits Mustang GT Only *Large/heavy box, may require additional shipping cost* View full product details
Hammer Shifter (Auto Trans)
$622.14
AOD & AODE transmission fit the stock factory full console for '94-'04 The Hammer has been designed to fit the stock factory full console for... View full product details
Harness Bar
$549.69
silver powder coated finish highest-grade materials reinforcement tubes on each side of the vehicle The Corbeau Mustang Harness Bar is a custom, direct fit in... View full product details
Harness Bar
$549.69
silver powder coated finish highest-grade materials reinforcement tubes on each side of the vehicle The Corbeau Mustang Harness Bar is a custom, direct fit in... View full product details
Harness Bar
$713.00
highest-grade materials silver powder coated finish reinforcement tubes on each side of the vehicle The Corbeau Mustang Harness Bar is a custom, direct fit in... View full product details
Harness Belts ( 3-Inch 5-Point Red Camlock)
$279.44
3-Inch Webbing Camlock System Bolt-In Wrap Around SFI Approved Length Adjusters Years of research and design have resulted in the development of the Corbeau 3-Inch... View full product details
Harness Belts (3-Inch 5-Point Black Latch & Link)
$280.59
3-Inch Webbing Latch & Link System Bolt-In Wrap Around SFI Approved Length Adjusters Years of research and design have resulted in the development of the... View full product details
Headlight Kit (Amber Corners)
$331.19
This headlight kit includes Ford headlights and reproduction sidemarkers & park lamps. Our 6 piece headlamp kit for the 1987-93 Mustang is of the highest... View full product details
Heat Exchanger
$724.49
100% Aluminum Construction / No Epoxy. Direct bolt-in installation. Larger capacity than stock provides better cooling. Less blower heat-soak under extended high-boost condition means more... View full product details
Heavy Duty Upper Control Arm (For Lowered Vehicles)
$328.90
More Traction, which means lower 60fts! Excellent bang-for-the-buck suspension piece Better handling with more stable cornering Maintains good ride quality Need more axle control with... View full product details
High Flow Catted Pipe (manual only)
$517.49
Limited 5 Year Or 50,000 Mile Warranty Compare MagnaFlow's catalytic converters with any other manufacturer and you'll see why MagnaFlow has become a leader in... View full product details
High Flow Catted X-Pipe (For use with Kooks Headers)
$1,109.74
Gain HP and TQ Aggressive Exhaust Sound Fits/installs like stock Quality craftsmanship Are you looking for more power and sound from your Mustang? Look no... View full product details
High Flow Flex Pipe (2 1/4 DIA)
$303.59
Stainless Steal Conection Will help improve air flow Direct bolt in. This flex pipe is a must for engines with mild upgrades. Replacing the stock... View full product details
High-Flow Catted X Pipe
$1,420.24
100% Stainless Steel Dyno Proven - increases hp and tq Emissions-Friendly Fits like stock Bolt-on - no modification required Works with your factory manifolds MagnaFlow's... View full product details
High-Flow Catted X-Pipe (For use with Kooks Headers, 11-12 GT500)
$1,151.14
Gain HP and TQ Aggressive Exhaust Sound Fits/installs like stock Quality craftsmanship Are you looking for more power and sound from your Mustang? Look no... View full product details
High-Flow H-Pipe with Cats (For Shorty/Stock Headers)
$1,193.09
Bolt-on 15-25 horsepower Retaining OEM quality and longevity Die-stamped flanges BBK Performance H pipes have been the number one performance brand that 86-93 Ford Mustang... View full product details
HOLLEY 2011-17 Mustang Dual 525 LPH Pump Module System-1050 LPH Total
$2,184.99
Holley provides a HydraMat, pump and regulator on each side of the saddle tank Two 525 lph pump modules to install in your tank The... View full product details
Ignition Control (6AL2)
$981.08
Built-in 2-Step rev control Configure using MSD software on your laptop Low-profile housing Perfect for high-hp applications MSD is excited to announce the next generation... View full product details
Ignition Control Module (6AL-2)
$646.29
Program Three Rev Limits In 100 RPM Increments Limited 1 Year Warranty wiring and a PC cable are supplied Volts and spark energy reaching 135... View full product details
Inflatable Lumbar
$116.14
very affordable extra lower back support Corbeau Inflatable Lumbar supports are a very affordable way to provide extra lower back support. The Inflatable Lumbar is... View full product details
Intake Manifold Spacer Kit (GT-40/Cobra 0.375'')
$112.69
Custom Phenolic Fiber 3/8 Affordable Bolt-On As one of the most affordable bolt-ons for today's automotive enthusiasts, bbk's phenolic manifold spacer kits have proven to... View full product details
Iridium park Plugs (TR6IX)
$17.24
Recommended for supercharged applications up to 17 psi When you choose NGK spark plugs, you're in good company. Automobile manufacturers around the world recognize our... View full product details
Iridium X 7 Spark Plug (2 Steps Colder)
$25.29
resists electrical and chemical wear Stable performance under extreme operating Excellent anti-fouling characteristics When you choose NGK spark plugs, you're in good company. Automobile manufacturers... View full product details
IRS Differential Bushings
$103.50
Eliminate wheel hop Increase traction No increase in NVH No decrease in ride comfort Stop differential movement and wheel-hop with polyurethane differential bushings from Steeda.... View full product details
IRS Roll Steer Kit
$292.09
Made in the United States Steeda's rear roll steer kit helps elimiate rear roll steer by correcting the bump steer geometry in the rear of... View full product details
IRS Subframe Bracket Kit
$112.70
Stiffens Cobra rear subframe connection Eliminates flexing Steeda's IRS Subframe Bracket Kit provides immediate improvement in handling by eliminating flex of the IRS subframe mounting... View full product details
Kooks 3 in. Axle-Back Exhaust
$2,632.34
Retains Factory Exhaust Actuator Uses Factory Valence Exhaust Ports Requires Kooks Long-Tube Headers and 3” Catted X-Tube View full product details
Kooks Catted X-Pipe (For use with Kooks Headers)
$894.69
Gain HP and TQ Aggressive Exhaust Sound Fits/installs like stock Quality craftsmanship Are you looking for more power and sound from your Mustang? Look no... View full product details
Lightweight Radiator Support
$433.55
Made from High Strength 4130 Steel Light weight and lose it off the front of the car! OEM Quality and Easy installation A Must for... View full product details
Low Fluid Level Indicator (Un-Mounted)
$111.54
includes an LED and an EZ installation grommet for use with any Boost Cooler Keeps track of low fluid level for Low level indicator - Keeps... View full product details
Lower Control Arm Upgrade Kit
$341.19
No added NVH after installation OEM quality and reliability Perfect for high-horsepower street applications Standard equipment on 2007-2013 Shelby GT500, 2013 Mustang GT with Track Pack,... View full product details
Lower Control Arms (Chromoly)
$466.90
Eliminates wheel hop, improves traction Lighter than stock and competitor's arms Chrome Moly Steel Construction 2x stronger than competitor's mild steel These Chrome Moly alloy... View full product details
Lower Crank Pulley Ring
$238.04
crank pulley rings are available in several sizes precision-machined from billet aluminum black-anodized Our crank pulley rings are designed for use with our Metco Motorsports... View full product details
Lower Motor Mount Inserts
$45.90
Ennergy Suspension Motor Mount Inserts Fits 2000-2004 Focus Comes with torque link bushings View full product details
Lower Speed Grille Insert (Chrome)
$177.09
This lower valance / bumper grille will not fit the Pony Package lower valance. This part number is for a lower valance/bumper grille on the... View full product details
Magnaflow Competition Axle-Back Exhaust
$1,724.99
All Mandrel Bent Tubing 409 Stainless Steel Construction Increased Horsepower and Torque Lifetime Construction Warranty Made in USA The MagnaFlow Competition Series Exhaust Systems are... View full product details
Magnaflow Competition Axle-Back Exhaust
$1,724.99
All Mandrel Bent Tubing 409 Stainless Steel Construction Increased Horsepower and Torque Lifetime Construction Warranty Made in USA The MagnaFlow Competition Series Exhaust Systems are... View full product details
Magnaflow Competition Axle-Back Exhaust - Black Tips
$1,839.99
All Mandrel Bent Tubing 409 Stainless Steel Construction with High Temp Satin Black Coating Increased Horsepower and Torque 1 Year Warranty on Black Finish, Lifetime... View full product details
Magnapack Axle-Back Exhaust System (Loud)
$1,264.99
Delivers an aggressive, Deep Tone 100% Stainless Steel Fully Polished Mufflers Dyno Proven Lifetime Warranty Dyno Proven to deliver you the power and sound you're... View full product details
Magnum Force Cold Air Intake (3.5 Ecoboost 2012+up)
$773.94
Limited 2 Year Warranty Huge High Flow, High Performance Conical Air Filters Washable, Reusable aFe's Stage 2 air intake system produces an astonishing 32 horsepower... View full product details
Manual Mustang 900HP 3.25" Carbon Fiber 1 Piece CV Shaft
$2,420.74
Fits 2015 manual Mustangs 3.5" 6061-T6 aluminum rated for 3450 ft/lbs of torque All hardware included 1 year warranty Driveshafts are made to order, current... View full product details
© 2025 Steeda. All trademarks and registered trademarks are the property of their respective owners.