Sale
Steeda ProFlow Mustang Cold Air Intake Kit - Manual GT (11-14), No tune required
$1,196.10
Does not get heat soaked like factory air box Cools to ambient temperature range significantly faster than the stock unit while producing more power Allows... View full product details
High Lift Hot Rod Cam Set
$2,389.35
No need to upgrade valve springs Gives your mustang that old school idle Great HP gains Give any 3-valve 4.6l or 5.4L a lopey idle... View full product details
Charge Motion Control Plates
$702.00
Bolts directly in place of factory plates Larger ports for better airflow Bolts directly in place of factory plates Steeda's patented CNC machined billet charge... View full product details
High Velocity Cold Air Kit
$670.95
Added horsepower and torque Lifetime filter Includes Velocity Stack Inlet, no inlet elbow to throttle body Stock inlet elbow can be utilized Stainless Steel Housing... View full product details
Ford Mustang GT 2018 Style OEM 5.0L Intake Manifold (2011-2023)
$1,052.99
Increases Air Intake Flow Increases Horsepower Bolt-On OEM Fit If you want to give your V-8 2011-2019 5.0L Coyote some more power, this original equipment... View full product details
X-Pipe With High Flow Converters (2.5
$1,592.99
15-20 horsepower OEM original O2 sensor locations Will Fit equipped with shorty headers or stock manifold These BBK direct replacement 1999-04 Mustang 4.6L GT or... View full product details
Supercharger Pulley (2.81)
$186.29
High quality product These Steeda Supercharger Pulleys are made from Steel not aluminum and have holes drilled around the center of the pulley to lower... View full product details
Supercharger Pulley (2.7'')
$445.50
Increases boost 3 psi over stock Excedes OEM Quality, with superior durability More Horsepower and Torque to the rear tires 100% made in the USA... View full product details
Ring & Pinion Gearset (3.55 Ratio)
$554.84
Quicker acceleration Strong forged construction Stronger And Quieter That Other Aftermarket Gears. OEM Quality, Our Superior Surface Finish, Hardening, And Manufacturing Consistency Provide The Strongest... View full product details
ProFlow Cold Air Intake Kit Ford Mustang GT (2011-2014) Tune Required
$1,274.40
Steeda's ProFlow Cold Air Intake on an otherwise stock 2011 5.0L Coyote Mustang has achieved a blistering 1/4 mile time of 11.96 at over 115mph!... View full product details
Cobra Snake Fender Emblem
$37.79
Includes right and left side injection molded plastic Chrome finish Original equipment on 1994-2004 SVT Mustang Cobra Includes right-and left-side emblems, two-way tape for easy... View full product details
Boss 302 Intake Manifold
$645.29
Boss 302 Mustang Same intake found on Boss 302 Mustang View full product details
Intake Manifold
$1,916.99
Looks great under the hood Tested to 20+ PSI Constructed of quality OEM materials Includes intake gaskets Fits under factory hood Excellent choice for forced... View full product details
High-Flow H-Pipe with Cats (For Shorty/Stock Headers)
$1,400.58
Bolt-on 15-25 horsepower Retaining OEM quality and longevity Die-stamped flanges BBK Performance H pipes have been the number one performance brand that 86-93 Ford Mustang... View full product details
Dual Fuel Pump Kit ('GT500')
$2,416.50
Includes Harness Drop in housing includes drive module Fits 2005-2008 Mustang GT Includes harness, dual fuel pumps, drop in housing and fuel pump driver module... View full product details
Cold Air Intake Kit
$823.50
Works with stock tune or custom tune Increased gas mileage Great performance 2 intake designs in one. Maximum Value Steeda's n high flow air intake... View full product details
Short H-Pipe For Longtube Headers w Catalytic Converters
$1,012.49
CNC mandrel bent aluminized tubing High flow catalytic converters Used with BBK full length headers BBK Performance short mid H pipes are specifically designed to... View full product details
ProFlow Mustang Cold Air Intake - GT 5.0L Tune required
$1,179.90
Easy bolt in installation Retains sound tube and factory cold air ducting Power increase at all RPM ranges - not just peak power Steeda Autosports,... View full product details
Full Length Headers (Chrome)
$850.49
CNC Mandrel Bent Tubing For Unrestrictive Airflow Pressure Tested To Ensure Leak Free Performance Dyno Proven Performance Adds 15 To 20 Horsepower Easy Bolt-On Installation... View full product details
BBK 1 5/8 Full Length Headers - Polished Ceramic (1979-1993)
Sold Out
15-20 horsepower increase 1 and 5/8th" diameter CAD designed Each set of BBK long tube, full length headers is CAD designed and manufactured with 1... View full product details
Steeda Supercharger Pulley (2.4'')
$404.99
Directly replaces factory supercharger pulley 2.4" diameter steel pulley with black coating. Up to 60 horsepower and 70 ft/lbs of torque! Increases boost by 2-3... View full product details
X-Pipe W Cats (For Shorty/Stock Headers)
$1,252.80
Limited 1 Year Warranty 15-20 horsepower depending on application. performance Xtracter center X section These BBK direct replacement 1986-93 Mustang 5.0L X-pipes feature high-flow catalytic... View full product details
ProFlow Cold Air Intake Ford Mustang GT S550 (2015-2020) No Tune Required
$1,316.25
Steeda ProFlow Mustang Cold Air Intake for your S550 opens up the intake system of Ford's 5.0 powerplant and allows it to breathe much more... View full product details
ProFlow Cold Air Intake Kit
$812.70
Largest horsepower and torque gains on the market Lifetime warranty Lifetime filter can be reoiled and reused Keeps hot air out, cold air in Lightweight... View full product details
Pro-Flow Cold Air Intake
$1,073.25
Seals out hot underhood air Utilizes the factory cold air intake ducting High quality billet aluminum velocity stack Increases HP and TQ Steeda Autosports, the... View full product details
Mass Air Meter (76mm)
$718.20
Calibrated for 19 lbs injectors 76mm 356 aluminum casting up to 15 RWHP The engineers at BBK have just released an all new line up... View full product details
Lightning Mass Air Meter (90 mm)
$569.69
Stock replacement 90mm Lightning Mass Air Meter Requires computer calibration Use this 90mm Mass Air Meter for Supercharged or N/A combinations. Requires computer calibration. View full product details
GT Supercar Fuel Pump (Single, Each)
$468.44
Sold individually Outflows factory fuel pump When you increase the horsepower of your latemodel mustang, there becomes a point where you reach the maximum potential... View full product details
Full Lenght Headers (Polished Ceramic)
$2,158.65
silver polished ceramic coating 14-22 rear wheel horsepower Each set of BBK long tube, full length headers is CAD designed and manufactured with 1 5/8"... View full product details
Camshaft (#19)
$850.49
Lobe Separation 115¡ Steeda proudly offers the #19 Cam, similar to the popular #18 Cam, but with a slightly wider lobe separation angle for better... View full product details
2011-17 Mustang 3.7L V6 Short Tuned Length 1-5/8" Exhaust Headers (Chrome)
$1,268.99
2011-17 Ford Mustang V6 owners can add additional horsepower and torque by replacing the restrictive factory cast exhaust headers with a set of these 1-5/8"... View full product details
Steeda Mustang GT MaxFlow Open Cold Air Intake (2015-2022)
$961.20
Over 30 rwhp and 23 ft/lb tq gain with a tune! Does not require cutting of the engine cover Prevents heat soak, unlike the factory... View full product details
Steeda ProFlow Mustang Cold Air Intake Kit - Automatic GT (11-14), No tune required
$1,196.10
Does not get heat soaked like factory air box Cools to ambient temperature range significantly faster than the stock unit while producing more power Allows... View full product details
10-Rib Belt Drive for 18-20 PSI (Black Snout)
$4,617.00
Multiple Boost Levels available Eliminates belt breakage Fits under stock hood (with minor modification) More power to the ground Tired of belts slipping, breaking or... View full product details
10-Rib Belt Drive for 15-17 PSI (Polished Snout)
$3,370.95
Multiple Boost Levels available Eliminates belt breakage Fits under stock hood (with minor modification) More power to the ground Tired of belts slipping, breaking or... View full product details
10-Rib Belt Drive for 15-17 PSI (Black Snout)
$3,680.10
Multiple Boost Levels available Eliminates belt breakage Fits under stock hood (with minor modification) More power to the ground Tired of belts slipping, breaking or... View full product details
X-Pipe with High Flow Cats (For Long Tube Headers)
$1,182.59
BBK X-pipes are made from 2-3/4 used with BBK full length headers View full product details
Velocity Cold Air Intake (carbon fibre)
$958.49
Largest horsepower and torque gains on the market Lifetime filter can be reoiled and reused Keeps hot air out, cold air in Lightweight Steeda has... View full product details
Steeda Focus ST Front Mount Intercooler - Street/Comp (13-16 ST)
$2,056.05
Rated at up to 600 horsepower! Specially designed end tanks for maximizing efficiency Twice the capacity of your stock intercooler Comes with Steeda logo Steeda's... View full product details
Longtube Headers (Chrome)
$1,375.64
CNC Mandrel Bent Tubing For Unrestrictive Airflow Pressure Tested To Ensure Leak Free Performance Dyno Proven Performance Each set of BBK Full length long tube... View full product details
Injector Set (39 lb)
$917.99
Set of 8 EV-6 Body USCAR style plug Original equipment on 2003-2004 SVT Mustang Ford racing offers these high flow 39 lb injectors that are... View full product details
Fuel Injector Set (80LB/HR)
$1,003.04
May require adaptor harnesses on certain applications flow rates are quoted at a delta pressure of 39.15 psi M-9593-LU80* 80 lbs./hr. EV6 11-12 ohms USCAR.All... View full product details
Cold Air Intake System
$535.94
Works with stock tune or custom tune Improves fuel economy Lifetime Warranty Steeda's n high flow air intake for the 2.5L Fusion is 2 intakes... View full product details
Cold Air Intake (Plastic Tube)
$1,003.04
Retains factory cold air feed duct Beautiful gloss black powdercoated heat shield 'Roto' molded intake tube offers minimizes heat soak Fits with stock strut tower... View full product details
Cold Air Intake (Carbon Fiber Tube)
$958.49
Retains factory cold air feed duct Beautiful gloss black powdercoated heat shield 'Roto' molded intake tube offers minimizes heat soak Fits with stock strut tower... View full product details
Camshaft (B303)
$809.99
Higher stall torque converter recommended for auto Also fits 1994-97 351W with factory roller cam The legendary B303 cam developed by Ford Racing for the... View full product details
2015-17 Mustang GT- 1-3/4" - 5.0 Long Tube Headers - 304 Stainless
Sold Out
headers are available in Full Chrome, Polished Silver ceramic or Stainless Steel 2015-2017 Ford Mustang GT Long Tube Full Length Exhaust Headers are Now Available... View full product details
2015-17 Ford Mustang GT 5.0L 1-3/4" Shorty Tuned Length Performance Exhaust Headers - Polished Ceramic
Sold Out
Headers are available in Chrome or polished silver ceramic finishes Take a look at the 2015-17 Ford Mustang 5.0 GT Coyote Short Tuned Length Exhaust... View full product details
© 2025 Steeda. All trademarks and registered trademarks are the property of their respective owners.