Manual Brake Installation Kit, 1993 Cobra/1994 GT master cylinder in 1987-93 Mustang

#MMBAK-3.1

$73.82

Hard-lines and fittings used with manual brake conversion, when installing either a 1993 Cobra or a 1994-95 GT master cylinder. Connects the relocated master cylinder to stock 1987-93 Mustang 5.0L brake system.

This kit fits
- Manual brake conversion
- 1993 Cobra master cylinder (BMC-2) and 1994-95 GT master cylinder(BMC-3)
- 1987-93 Mustang
- Does not fit with a vacuum power booster
Benefits
- Connects a master cylinder relocated by a manual brake conversion to the stock proportioning valve location.
- Will connect to the MM Proportioning Valve Eliminator Kit (MMBAK-6)
- Direct fit installation; no cutting or flaring of brake lines
Product Features
- Pre-bent hard-lines
- Correct tube nuts; no separate adapters needed
- T-fitting connects 2-port 1993 Cobra and 1994 GT master cylinders to 3-inlet 1987-93 Mustang brake system
Notes
- Requires a manual brake conversion.
- For best performance, use an adjustable proportioning valve (BPV-1).
- Time Required: 1 hour (approximately)
- Skill Level: Beginner - No mechanical experience is required to perform this installation.
- Mustang 1979-1993 GT
- Mustang 1979-1993 LX