Products
1-PC Aluminum Driveshaft (Manual or Auto Trans)
$1,690.59
Up to 2 tenths improvement in 1/4 mile Reduced rotating mass and vehicle weight Smooth operation Reduces drivetrain loss Axle Exchange's aluminum driveshafts for the... View full product details
170 Degree Thermostat
$164.77
Vehicle-specific custom design Hand made an quality tested Perfect compliment for an aftermarket radiator Many have searched the internet and part stores for a properly... View full product details
2200 cc fuel injector
$3,464.65
2225cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F) 9.0 Bar (130.5 psi) Electrical Connector Ð Denso View full product details
Adjustable Race Panhard Bar
$379.85
High quality construction Lighter than stock Allows for easy alignment of rear-end A great step towards improved handling out back is to upgrade the panhard... View full product details
Adjustable Rear Swaybar
$834.60
3 Position adjustablity Competition level proven handling performance Improves steering response and eliminates understeer Looking to build the ultimate handling Mustang? Steeda's adjustable rear swaybar... View full product details
Adjustable Street Panhard Bar
$395.89
High quality construction Lighter than stock Allows for easy alignment of rear-end A great step towards improved handling out back is to upgrade the panhard... View full product details
Adjustable Suspension System (Complete Kit)
$2,916.81
Improved vehicle handling Great ride quality Improved vehicle stance Ready to step up to an adjustable suspension setup on your 2005 and up Mustang? Buy... View full product details
Adjustable Upper Control Arm (Street, Polyurethane Bushings)
$433.35
Adjustable pinion angle for optimum traction Better handling with more stable cornering Three piece urethane bushings for better traction Competition tested & proven Need to... View full product details
Aggressive Axle-Back Exhaust System (Loud)
$962.99
Delivers a aggressive, Deep Tone 100% Stainless Steel Fully Polished Mufflers Dyno Proven Lifetime Warranty Dyno Proven to deliver you the power and sound you're... View full product details
Aluminum Battery Cover
$119.83
Perfect match for your other Moroso underhood tanks May be polished for a mirror-like finish Lightweight design There's no better way to cover your battery... View full product details
American Thunder Axle-Back Exhaust System
$731.87
Mandrel bent 16 gauge 409 stainless tubing Moderate exterior exhaust tone Includes hangers and hardware for easy installation Dyno tuned for maximum performance This moderate... View full product details
Axle Back Exhaust S-Type
$888.09
2-1/2 Inch 4 Inch Diameter X 12 Inch Length Stainless Steel Mustang has always been about muscle, looks, and loads of customization options. BORLA's lineup... View full product details
Axle Back Exhaust S-Type (2011-12)
$1,540.79
4 Inch Diameter X 10.9 Inch Length Stainless Steel Single Inlet And Single Outlet The head-turning sound of straight-through power. Just the right blend of... View full product details
Axle Girdle (8.8'')
$427.99
356t6 Aluminum Lightweight Increase gear life Lightweight 356T6 Aluminum Casting Replaces Rear Cover On 8.8 Inch Load Bolts Provide Additional Support For Differential Bearing Caps... View full product details
Axle-Back Exhaust ATAK
$1,069.99
2-3/4 Inch 4 Inch Diameter X 12 Inch Length Stainless Steel The power of BORLA Multicore technology, with the sound of vehicle-specific acoustic tuning! ATAK... View full product details
Axle-Back Exhaust S-Type
$1,572.89
2-3/4 Inch Stainless Steel Single Round Rolled Angle Cut With over 400 internal muffler designs based on the technologies shown here, BORLA offers exhaust systems... View full product details
Axle-Back Exhaust Touring
$1,669.19
2-3/4 Inch Stainless Steel 4-1/2 Inch Tip Single Round Rolled Angle Cut With over 400 internal muffler designs based on the technologies shown here, BORLA... View full product details
Billet Fuel Door (5.0 Logo Triple Chrome Plate)
$297.45
Silverhorse Racing's Tru-Billet fuel door is a high quality made in the USA product. Machined out of solid 6061-T6 aluminum to exact specifications for great... View full product details
Black 5.0L Emblem set (Ford Licensed)
$85.59
Restore Or Customize Your Exterior Appearance Looks Great Anywhere Peel And Stick Design Black Numbers With Red Dot Plastic Emblem - will not corrode The... View full product details
Boost/Vacuum Sensor Kit (2 bar)
$112.34
Needed to monitor boost pressure Can read up to 15 psi Needed to monitor boost pressure with inteceptor gauges. requires the input of a 5... View full product details
Boss 302 Lowering Springs
$732.95
Greatly improves handling performance Ride quality nearly equal to factory ride quality Competition level handling performance For those who wish to take their 2012 Boss... View full product details
Competition Upper Spring Seats
$460.09
Direct factory replacement OEM Quality High-grade spherical bearing design For the front struts. These are a direct replacement for the weak plastic factory mounts. The... View full product details
Cue Ball Shift Knob
$139.09
Very easy to install Comfortable shifter feel Classic cue ball design Replacement shifter boot collar and knob for the 2011 Mustang V6 and GT with... View full product details
Cue Ball Shift Knob with Billet Collar (White)
$141.24
Very easy to install Comfortable shifter feel Classic cue ball design Replacement shifter boot collar and knob for the 2011 Mustang V6 and GT with... View full product details
Dual Interceptor Gauge set (Blue/Black Screen)
$802.49
Easy & quick installation Extremely accurate data User programmable custom options Inverts foreground/background colours Analog inputs for external data Reads "check engine" (DTC) codes The... View full product details
Dual Interceptor Gauge set (White/Black Screen)
$802.49
Easy & quick installation Extremely accurate data User programmable custom options Inverts foreground/background colours Analog inputs for external data Reads "check engine" (DTC) codes The... View full product details
Eradispeed Brake Rotors (Rear 14") Wheel fitment is based on 2005-2014 stock models. Wheel fitment may vary on specialty models. Check link and use template prior to purchase. https://baer.com/14-Rear-EradiSpeed-1-Rotor-Upgrade-2262019.html
$1,162.01
Most applications are for pick ups and SUV Rotor Upgrades EradiSpeed™ rotors feature premium high silicon content iron castings. Rotor plates or outer rotor surfaces... View full product details
Eradispeed Front Rotors (2pc)
$1,258.31
Rotor UpgradesEradiSpeed™ rotors feature premium high silicon content iron castings. Rotor plates or outer rotor surfaces are cast with additional mass to absorb additional heat.... View full product details
FR500S Hub Kit
$452.60
New hub nut One Pair of Upgrade Hubs with 3-inch ARP studs Equipped with ARP Front Wheel Studs Service replacement part for the Mustang FR500S... View full product details
Front Chin Splitter Kit (2013+)
$638.78
More aggressive look Direct factory splitter replacement Made of injection molded TPO plastic Black textured OEM look Does not require paint The Mustang Front Chin... View full product details
Front Control Arm Relocation Kit
$136.95
Most durable on the market Improved braking and vehicle control Better handling for more stable cornering Better suspension compliance Does not require spacer Better contact... View full product details
G-Trac Brace
$179.76
Improves suspension compliance Reduces flex in front suspension Our G-trac bar is a direct bolt on replacement for your S197 Mustang and provides greatly improved... View full product details
Gear Oil (75 w110 )
$24.60
Engineered for high-demand applications commercial use and racing Protects gears and bearings from scoring Engineered for high-demand applications, including trailer towing, heavy hauling, 4X4 off-road... View full product details
Gear Oil (75 w140)
$26.74
Engineered for high-demand applications commercial use and racing Engineered for high-demand applications, including trailer towing, heavy hauling, 4X4 off-road driving, commercial use and racing. Protects... View full product details
Harness Bar
$511.45
silver powder coated finish highest-grade materials reinforcement tubes on each side of the vehicle The Corbeau Mustang Harness Bar is a custom, direct fit in... View full product details
Heavy Duty Adjustable Engine Mounts
$399.11
Allows for a 3/4 Adjustable in 1/4 High quality billet construction Made in the USA by Steeda Steeda Adjustable Motor Mounts for 2005-2010 Mustang directly... View full product details
Heavy Duty Upper Control Arm (For Lowered Vehicles)
$278.20
More Traction, which means lower 60fts! Excellent bang-for-the-buck suspension piece Better handling with more stable cornering Maintains good ride quality Need more axle control with... View full product details
Heavy Duty Upper Strut Mounts
$1,096.75
+/- 1 degree of camber adjustment Precision Tolerance and Fit No suspension knockback Steeda's Upper Strut Mounts for 2011+ Mustang have been tested on several... View full product details
Hellion Twin Turbo System
$14,614.05
Twin Precision billet 62mm turbos Twin Turbosmart 40 mm wastegates Twin Turbosmart VEE port bypass valves Large vertical flow dual inlet intercooler Dual 3 Take... View full product details
High Volume Clutch Line Kit
$147.66
Better clutch pedal feel Eliminates shifting issues High quality stainless steel construction Resists bulging in extreme applications This kit is designed to eliminate restrictions found... View full product details
Hood Strut Kit (Billet Engraved)
$322.07
Eliminates prop rod Lifetime warranty Lightweight billet aluminum construction Steeda's all new billet hood strut kit is the perfect way to dress up the engine... View full product details
Hood Strut Kit (Billet Non-Engraved)
$249.31
Creates more room to work under your hood Lightweight stylish billet aluminum No drilling or modification required for install Hood struts meet/exceed OE standards Steeda's... View full product details
Hydraulic clutch release Bearing
$316.71
Exedy's Hydraulic Throwout Bearing & Slave Cylinder is designed for use with the Exedy heavy duty clutch systems, and it also works with OEM clutch... View full product details
Idler and Tensioner Pulley Kit (Billet)
$181.89
Made to be stronger then the OEM unit Made from aerospace grade aluminum Dress up your engine bay Steeda's lightweight billet aluminum idler and tensioner... View full product details
Injector Adaptor Kit (USCAR to Jettronic)
$110.20
Simple installation Eliminates the need to cut your factory harness Adapts your USCAR style harness to Jettronic/Minimeter fuel injectors. Single-piece design for improved reliability and... View full product details
Invo (275/40-20)
$487.91
Temperature: A Traction: AA UTQG Treadwear for Y: 220 UTQG Treadwear for W: 260 The Invo is an ultra high performance street tire that provides... View full product details
Lightweight Radiator Support
$483.64
Lightweight thin-wall tubing Optional use of swaybar or Z-brace Lower splash shield can be re-used (with zip-ties) Steeda's Lightweight Tubular Front radiator support is the... View full product details
Lower Control Arms (Chromoly)
$410.88
Eliminates wheel hop, improves traction Lighter than stock and competitor's arms Chrome Moly Steel Construction 2x stronger than competitor's mild steel These Chrome Moly alloy... View full product details
© 2024 Steeda. All trademarks and registered trademarks are the property of their respective owners.