Engine
Steeda Mustang Coolant Expansion Tank Black (2015-2023)
$553.50
Direct bolt-in replacement Fabricated aluminum for strength, plastic tanks may fail after repeated high heat situations Uses factory vented cap, bleeds pressure like the factory... View full product details
Belt Tensioner
$603.45
Made from Billet aluminum for strength and light weight Easily adjustable for proper tension High grade sealed ball bearing design Steeda's Blower Belt Tensioner for... View full product details
Crank Bolt (SOHC & DOHC)
$53.99
One time use Required when changing your balancer or upgrading to an underdrive pulley set with new balancer. The bolt ford used to hold the... View full product details
Oversized Alternator Pulley (3.20'')
$122.84
Prevents alternator damage will speed up your supercharger you also spin the accessories faster too Running an oversized crank pulley will speed up your supercharger,... View full product details
A/C Eliminator Kit
$257.84
Not for use with manual steering applications. Requires new belt Hardware included. Bracket conversion kit to remove air conditioning compressor for racing applications. This two-piece... View full product details
Coolant Reservoir (Aluminum)
$567.00
Direct replacement Stronger and more durable than factory tank Great looks Want to dress up your engine bay? This Moroso Coolant reservoir replaces the factory... View full product details
Aluminum Pulley Kit (3 Piece)
$310.49
Limited 1 Year Warranty 8-15 horsepower Allow the use of existing serpentine belts Made from aircraft quality machined steel or aluminum alloy these BBK under... View full product details
Steeda Focus Engine Mount - Left (00-04 Zetec Engine)
$388.80
Product Benefits Increases stability High quality billet construction Engine mount for the left side Made in the USA by Steeda The Ford factory engine mounts... View full product details
Turbosmart Blow Off Valve Kompact Shortie Dual Port
$418.49
50/50 vented valve O-ring sealed piston The Kompact range of BOVs and BPVs offer more versatility, higher performance, OEM fitment and less cost – everything... View full product details
Blower Belt Tensioner
$357.75
Improved belt wrap for elimating belt slip Easy install Steeda's Cobra Blower Belt Tensioner creates more belt wrap around blower pulley for less belt slip... View full product details
Underdrive Pulley Kit (Polished)
$276.74
8-15 horsepower polished aluminum finish direct bolt on replacements retain full cooling and charging characteristics These BBK pulley kits are designed as direct bolt on... View full product details
Steeda Billet Idler Pulleys for the 2015-2017 Mustang GT
$269.99
Made to be stronger than the OEM pulleys. Made from Aerospace grade aluminum. Made in the USA Steeda's lightweight billet aluminum idler and tensioner pulleys... View full product details
High Volume Oil Pump
$289.59
Original equipment on Mustang Cobra Increases flow on 96-2004 GT models Original equipment on 4.6 Liter 4 Voltage. Increases flow on 4.6 Liter 2 Voltage... View full product details
Lower Crank Pulley Ring
$279.44
crank pulley rings are available in several sizes precision-machined from billet aluminum black-anodized Our crank pulley rings are designed for use with our Metco Motorsports... View full product details
Power Steering Reservoir (Aluminum)
$245.69
This light weight aluminum tank offers increased strength and an improved look over the factory tank. It is baffled for proper fluid control and comes... View full product details
Adjustable Alternator Bracket Kit
$153.89
Replaces bulky alternator Bracket Fits 86-93 Mustang with 5.0 Engine This bracket can eliminate up to 45 lbs. of front end weight thereby improving front... View full product details
Underdrive Pulleys (Black Aluminum)
$337.49
Bolt on 8-10 horses reducing the the drag on your engine keep your stock serpentine belt. Bolt on 8-10 horses! Underdrive pulleys give back the... View full product details
Supercharger Coolant Reservoir (Aluminum)
$687.14
Direct bolt in More coolant capacity Great looks Moroso's Supercharger coolant reservoir are designed to be a direct replacement for your factory plastic tank. They... View full product details
Aluminum Power Steering Reservoir
$233.54
Direct replacement Looks better compared to factory plastic tank Tired of looking at your mustangsÊ factory plastic power steering tank, replace it with Moroso's aluminum... View full product details
Power Steering Tank (Aluminum)
$255.14
Direct replacement More durable than plastic factory piece Looks great Tired of looking at your Mustang's factory plastic power steering tank, replace it with Moroso's... View full product details
March A/C Eliminator Kit
$134.99
This bracket can eliminate up to 45 lbs All grade 8 mounting hardware included This bracket can eliminate up to 45 lbs. of front end... View full product details
Steel Underdrive Pulley Set (Black)
$187.64
Increases horsepower reducing accessory drag 11 h.p. at rear wheel These little power-making gems have been around for more than a decade. Whether you bolt... View full product details
FORD COYOTE SWAP OIL PAN 1979-2004 Mustang 5.0L Coyote engine swap
$701.99
Low-profile front pan geometry permits Coyote engine installation on stock 1984-2004 Mustang K-members (1984-1995 K-members require the use of specific proprietary design Hooker Blackheart engine... View full product details
MUSTANG GT/COBRA UNDERDRIVE PULLEYS (96-01)
$418.49
Bolt on 8-10 Horsepower Durable Billet Aluminum Construction Retains Proper Cooling and Charging Uses Factory Length Belt For 2001 Models See Instructions to Verify Water... View full product details
Ford Racing Mountune Oil Control System (13-16 ST)
$4,600,901.25
Includes CNC aluminum balance shaft delete assembly High temp NBR one way valves Can be installed with engine in the car CNC laser cut aluminum... View full product details
2.4'' Supercharger Pulley
$391.49
One piece steel design - super strong Precision machined for stock-like press fit Looks great under the hood New 2.4" Stainless-Steel Race pulley for 13... View full product details
High Volume Oil Pump
$125.54
High volume - standard pressure Use with Ford Racing BOSS 302 block Requires bolt-on pickup Fits: 1963-2000 289/302 High volume - standard pressure Use with Ford... View full product details
Valve Cover Set
$384.74
Black satin finish May require modifications for roller rockers Includes oil fill cap and grommets Fits 289/302/351W (except EFI) Die-cast aluminum with baffle Black satin... View full product details
Interchangeable Crank Pulley (4 LB Ring)
$917.99
lightweight precision-machined aluminum hub including a billet bracket This comprehensive kit allows the user to replace the heavy factory crankshaft pulley and cage assembly with... View full product details
Timing Adjuster
$1,140.75
Built with high-quality materials Allows for timing advance/retard without computer chip Works with Steeda underdrive pullies Steeda's Patented Timing Adjuster lets you advance or retard... View full product details
Idler and Tensioner Pulley Kit (Billet)
$244.35
Made to be stronger then the OEM unit Made from aerospace grade aluminum Dress up your engine bay Steeda's lightweight billet aluminum idler and tensioner... View full product details
Adjustable Auxilary Idler
$622.34
In the world of forced induction Whipple is one of the most well respected names on the market. They have been in business for over... View full product details
Power Force Plus Harmonic Balancer (50 oz)
$395.54
These dampers are manufactured to match the dimensions of the stock early (1963-'69) small block Ford dampers. The outside diameter and the thickness are the... View full product details
Powerforce Dampner (50 oz)
$257.84
Despite our extremely attractive prices, the quality of our dampers is equal to or in most cases, exceeds that of any other harmonic damper manufacturer.... View full product details
Aluminum Valve Covers
$1,078.64
Quality, lightweight Aluminum Thick Billet Rails resist warping Tall design to clear rockers 99-00 GT Aluminum Valve Covers. Quality construction, lightweight design. Thick billet rails... View full product details
Performer RPM Aluminum Cylinder Head (1.90 Intake Valve Complete)
$2,024.99
Combustion chamber volume 60cc Intake runner volume 170cc Intake valve diameter 1.90 Exhaust valve diameter 1.60 Designed for non-emissions 289, 302, and 351-Windsor Ford engines.... View full product details
Steel Oil Pan
$591.29
Zinc coated Steel 7qt oil Pan Fits 4.6/5.4 engines Sohc/Dohc. View full product details
Street & Strip Oil Pan (Black 7QT)
$579.14
Includes universal dipstick 7 Quarts Oil Capacity 9 inch Total Depth Rear, wet sump style Designed for street performance machines that see occasional strip use,... View full product details
Underdrive Pulley Set
$203.84
6 To 10 Horsepower In Under 30 Minutes Retain Full Cooling And Charging Characteristics Made from aircraft quality aluminum alloy these BBK under drive front... View full product details
Underdrive Pulley Set
$215.99
8-15 horsepower allow the use of existing serpentine belts bolt on replacements Made from aircraft quality machined steel or aluminum alloy these BBK under drive... View full product details
Lower Intake Gaskets
$59.39
If you have your intake manifold off for maintenance or upgrading to a better one.Ê Be sure to re-install it with a set of fel... View full product details
Upper to Lower Intake Gasket
$16.19
Manufactured From Cellulose/Nitrile Composition Gasket Provides Excellent Sealing And Durability Can Be Trimmed If Necessary For Modified Port With the ever increasing technology in performance... View full product details
© 2025 Steeda. All trademarks and registered trademarks are the property of their respective owners.