Exhaust
Steeda S550/S650 Mustang GT 5.0L Coyote 304 Stainless Resonator Delete H-Pipe (2018-2024)
$460.10
Improves low-end torque over factory resonator Traditional deep muscle car exhaust note 304SS will not rust like inferior 409SS or aluminized steel pipes Sheds up... View full product details
Steeda S550/S650 Mustang GT 5.0L Coyote 304 Stainless Resonator Delete X-Pipe (2018-2024)
$460.10
Steeda design improves exhaust flow over factory resonator and pipe design up to 20% 304SS will not rust like inferior 409SS or aluminized steel pipes... View full product details
Steeda S550/S650 Mustang GT 5.0L Coyote 304 Stainless Resonator Delete H-Pipe (2015-2024)
$460.10
Improves low-end torque over factory resonator Traditional deep muscle car exhaust note 304SS will not rust like inferior 409SS or aluminized steel pipes Sheds up... View full product details
02 Sensor Bung and Plug
$95.22
18mm thread comes as a kit - bung and plug If you need to add an extra sensor in your exhaust for an aftermarket wideband... View full product details
O2 Sensor Extensions (Pair)
$106.99
18 inches long These will work on 3 and 4 wire applications OEM Factory connectors BBK O2 Wire Harness Extenders are 18 inches long. Due... View full product details
X-Pipe With High Flow Converters (2.5
$1,262.59
15-20 horsepower OEM original O2 sensor locations Will Fit equipped with shorty headers or stock manifold These BBK direct replacement 1999-04 Mustang 4.6L GT or... View full product details
Steeda Shelby GT350 304 Stainless Resonator Delete H-Pipe (2015-2020)
$465.45
Improves low-end torque over factory resonator Deep traditional muscle car like exhaust note Premium T304 stainless steel will not corrode or rust No tune required ... View full product details
Roush Cut and Clamp Resonator Delete X-Pipe
$504.97
Reduces back pressure and improves the flow of your Mustang's exhaust system for maximum horsepower, torque, and overall performance Pipes are made with high-quality stainless... View full product details
High-Flow H-Pipe with Cats (For Shorty/Stock Headers)
$1,110.09
Bolt-on 15-25 horsepower Retaining OEM quality and longevity Die-stamped flanges BBK Performance H pipes have been the number one performance brand that 86-93 Ford Mustang... View full product details
Header Gaskets
$62.05
Sold in Pairs Provides a great seal!! Fel-Pro Performance exhaust header gaskets are made from high-temperature, high-density fiber material around a perforated steel core, for... View full product details
Mustang GT Cat-Back Exhaust S-Type (2018-2020)
$2,621.49
T304 Stainless Steel 3" pipe diameter 4" exhaust tips Without Active Valve Exhaust NOT Recommended For Convertible 2018-2020 Ford Mustang GT 5.0L V8 Automatic/ Manual... View full product details
BBK 3 in. Long Tube Header Catted Mid Pipe
$1,179.14
BBK CNC series short mid pipes are available with high flow catalytic converters or as off road race only versions For use on all 2015... View full product details
BBK 1-7/8 in. Chrome Long Tube Headers
$1,314.87
2011, 2012, 2013, 2014, 2015, 2016, 2017 Mustang 5.0 GT Full Length Long Tube Exhaust Headers & High Flow X Pipes From BBK Performance are... View full product details
Borla ATAK 2.5 in. Cat-Back Exhaust - Black Tips
$2,138.93
Note: Convertible only With over 30 years of experience, Borla is now a globally recognized brand that’s committed in providing world-class exhaust products which surpass... View full product details
11-14 - 4 Pin Ford Mustang GT & V6 Rear 12" 02 Wire Harness Extension Kit (Pair)
$132.68
Due to the fact that the O2 sensors are relocated on ALL long tube headers including other manufacturers- These extensions are a must when Installing... View full product details
Long Tube Headers
$1,059.29
silver polished ceramic coating 3 1.625 Each set of BBK long tube, full length headers is CAD designed and manufactured with 1 5/8" CNC mandrel... View full product details
1 5/8 Full Length Headers - Polished Ceramic
$909.49
15-20 horsepower increase 1 and 5/8th" diameter CAD designed Each set of BBK long tube, full length headers is CAD designed and manufactured with 1... View full product details
S Type Stainless Steel Axle Back Exhaust System
$1,021.58
Single Round Rolled Angle-Cut tips Single Split Rear Exit For nearly 3 decades, BORLA Exhaust has been the choice of Mustang experts, from the Cobra-R... View full product details
Full Length Headers (Chrome)
$674.09
CNC Mandrel Bent Tubing For Unrestrictive Airflow Pressure Tested To Ensure Leak Free Performance Dyno Proven Performance Adds 15 To 20 Horsepower Easy Bolt-On Installation... View full product details
Short H-Pipe For Longtube Headers w Catalytic Converters
$802.49
CNC mandrel bent aluminized tubing High flow catalytic converters Used with BBK full length headers BBK Performance short mid H pipes are specifically designed to... View full product details
MRT Fusion Sport 2.7L Version 2 Axle-Back Exhaust (2017-2019)
$1,358.89
Increase in exhaust flow and frees up horsepower and torque 3" double-walled 304 stainless steel tips complete with beveled edges 2.5" T304 Stainless Steel Construction... View full product details
FLOWMASTER AMERICAN THUNDER CAT-BACK EXHAUST SYSTEM 1987-1993 Ford Mustang LX with 5.0L engine/1986 Mustang GT with 5.0L
$1,133.13
Includes Hangers and Hardware for Easy Installation Mandrel-bent 16-gauge Stainless Steel Tubing Aggressive Sound Exterior Exhaust Tone Dyno Tuned for Maximum Performance Super 44 Series... View full product details
FLOWMASTER AMERICAN THUNDER CAT-BACK EXHAUST SYSTEM 1987-1993 Ford Mustang LX with 5.0L engine/1986 Mustang GT with 5.0L
$1,337.18
Includes Hangers and Hardware for Easy Installation Mandrel-bent 16-Gauge Aluminized Tubing Aggressive Sound Exterior Exhaust Tone Dyno Tuned for Maximum Performance Super 44 Series Performance... View full product details
FLOWMASTER FORCE II CAT-BACK EXHAUST SYSTEM 1986-1993 Ford Mustang LX with 5.0L engine and 1986 GT with 5.0L engine
$1,134.19
Includes Hangers and Hardware for Easy Installation Pair of 50 Series Delta Flow Performance Mufflers Mandrel-bent 16 Gauge Aluminized Steel Tubing Polished 304 Stainless Steel... View full product details
Borla Explorer ST ATAK Cat-Back Exhaust - Black Chrome Tips (2020-2021 EXPLORER)
$2,374.33
Cat-Back Exhaust System ATAK® Sound Level No Drone Quad Black Chrome On T-304 Stainless Steel Tips Bolt On Installation T-304 Stainless Steel Construction Million-Mile Warranty... View full product details
Mustang GT/ Boss 302 Axle-Back Exhaust S-Type (2011-2012)
$1,497.99
T304 Stainless Steel 2.75" pipe diameter 4.50" exhaust tips 2011-2012 Ford Mustang GT/ 2012 Boss 302 - 5.0L V8 Automatic/ Manual Transmission Rear Wheel Drive... View full product details
Mustang GT/ Boss 302 Axle-Back Exhaust ATAK ( 2011-2012)
$1,497.99
T304 Stainless Steel 2.75" pipe diameter 4.50" exhaust tips 2011-2012 Ford Mustang GT/ 2012 Boss 302 - 5.0L V8 Automatic/ Manual Transmission Rear Wheel Drive... View full product details
Mustang GT without active exhaust valve Axle-Back Exhaust S-Type ( 2018-2023)
$1,444.49
T304 Stainless Steel 2.5" pipe diameter 3" exhaust tips 2018-2023 Ford Mustang GT 5.0L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Coupe/ Convertible... View full product details
2017 Fusion Sport 2.7L MRT Axle-Back Exhaust
$877.39
Increase in exhaust flow reduces back pressure and frees up horsepower and torque while allowing your 2.7L EcoBoost to really roar MRT builds their Axle-Back... View full product details
99-04 MUSTANG COBRA IRS 2.5" CAT BACK SYSTEM BLACK
$855.99
The Pypes Phantom Series is designed to give your car or truck a new sleek look. Black is the new color on the market. All... View full product details
BBK 3 in. Long Tube Header Catted Mid Pipe
$1,179.46
BBK CNC series short mid pipes are available with high flow catalytic converters For use on all 2015 up Mustang GT 5.0 applications when installing... View full product details
Flowmaster Scavenger Series Cut and Clamp Resonator Delete Y-Pipe
$534.99
Stainless Steel Construction Dyno Tuned For Maximum Performance Mandrel Bent Tubing Made in the USA Flowmaster's new Resonator-Delete kit for the 2015-2017 Ford Mustang with... View full product details
Mustang GT Axle-Back Exhaust S-Type (2015-2017)
$1,283.99
T304 Stainless Steel 2.5" pipe diameter 4" exhaust tips 2015-2017 Ford Mustang GT/ GT Convertible 5.0L Automatic/ Manual Transmission Rear Wheel Drive 2 Door. With... View full product details
Borla ATAK Cat-Back Exhaust
$1,883.19
Note: Does not fit convertible With over 30 years of experience, Borla is now a globally recognized brand that’s committed in providing world-class exhaust products... View full product details
MBRP XP Series Cat-Back Exhaust w/ H-Pipe - Race Version
$1,269.01
Note: Convertible only MBRP's XP Series is the performance exhaust of choice for the enthusiast who needs a system that can take anything that the... View full product details
MBRP Black Series Cat-Back Exhaust w/ H-Pipe - Street Version
$1,191.97
Note: Does not fit convertible Our Black Series performance exhaust systems offer a true murdered-out style without compromising on quality and performance. With fully sealed... View full product details
2011-17 Mustang 3.7L V6 Short Tuned Length 1-5/8" Exhaust Headers (Chrome)
$1,005.79
2011-17 Ford Mustang V6 owners can add additional horsepower and torque by replacing the restrictive factory cast exhaust headers with a set of these 1-5/8"... View full product details
2015-17 Mustang GT O2 Harnesses + Hardware Kit Required For Installation
$134.14
2015-2017 Mustang BBK O2 Wire Harness Extenders. Due to the fact that the O2 sensors are relocated on ALL long tube headers including other manufacturers-... View full product details
Stage 8 Locking Header Bolts (Set of 16 Fit Most Stock Headers)
$116.62
Most Headers on pushrod engines Grade 8 aircraft quality bolts Will not fit 4.6L/5.4L modular V-8 100% reliable, zero failures in more than 6,000,000 applications.... View full product details
Dual Exhaust Kit
$1,568.61
409 Stainless steel Includes x pipe Throatier exhaust note Fits 2005-2009 Mustang V6. For 2010 Mustang V6 see M-5230-MV62 Includes mufflers M-5230-GTB used as standard... View full product details
Long Tube Headers (With Catted X Pipe)
$3,504.13
304 Stainless Steel Construction X-Pipe High Flow Catalytic Converter Factory Connect (Direct Bolt-In) Stainless Works USA made, custom-built, stainless steel headers and exhausts are the... View full product details
Long Tube Headers (With Catted Leads)
$3,418.64
304 Stainless Steel High Flow Catalytic Converter Factory Connect 30 RWHP and 30 RWFT 2005-10 Mustang GT 1 3/4" headers. Includes (2) 3" high flow... View full product details
Stainless Steel Catted Y Pipe (Ecoboost)
$1,797.59
304 Stainless Steel Construction High Flow Catalytic Converter Factory Connect (Direct Bolt-In) Stainless steel 3" downpipe with catalytic converter. Includes Y-pipe to fit to factory... View full product details
Cat Back Exhaust System
$1,818.99
2.5 3.5 Stainless Steel Cat Back Exhaust Stainless Steel Cat Back Exhaust 2.5" diameter tubing 3.5" Tips Fits 99-04 Mustang GT *Large/heavy box, may require... View full product details
1 7/8 Inch X 3 Inch STAINLESS STEEL LONG TUBE HEADER W/ CATTED CONNECTION PIPE
$4,185.34
Includes Catted Connection Pipes 1.875 diameter into 3 inch collector 1 7/8" x 3" Stainless Steel Long Tube Headers. Includes Catted Connection Pipes., not recommended... View full product details
Headers - 5.4L
$1,945.29
304 Stainless Steel Construction Collector 3 inch Stainless Works USA made, custom-built, stainless steel headers and exhausts are the best for improving your vehicle's... View full product details
Long Tube Headers (With Off Road Y Pipe)
$2,187.07
304 Stainless Steel Construction Automatic Or Manual Off-Road Pipes Stainless Works USA made, custom-built, stainless steel headers and exhausts are the best for improving your... View full product details
Delta Flow Mufflers (50 Series 2.25 Inlet/Outlet)
$172.26
Moderate exterior sound level Mild interior resonance Excellent choice for Street Rod cars and trucks The three chamber design utilizes Flowmaster's patented Delta Flow technology... View full product details
© 2025 Steeda. All trademarks and registered trademarks are the property of their respective owners.