Stop the Hop Handling Ultimate Kit (with Diff Lockouts)

Our Sales Experts take calls all the time from enthusiasts that want to eliminate wheel hop and improve the handling of their Mustang. This is where the Stop the Hop Handling Ultimate Kit comes in. Our team of engineers got together and came up with the best parts for eliminating unwanted wheel hop and bushing deflection in the new S550/S650 Mustang to help you take corners faster and get tack sharp handling. A kit that gives you the fundamental foundation for ultimate traction and suspension compliance. As we have explained before, the factory IRS subframe, (often inaccurately referred to as a cradle), mounts to the S550/S650 chassis with 4 mounting locations utilizing 4 soft rubber bushings with plenty of voids, even in the bolt holes. The kit we put together addresses these issues and more. Installed on our 2024 Mustang GT HPDE build along with our Competition Front and Rear Sway Bar Kit, we achieved over a 2 second improvement in our lap times!

First is our Alignment dowel kit. This fills the factory bolt hole voids with CNC machined delrin inserts that will square up the rear subframe to the chassis. By filling these voids we are also limiting the side to side and front to back movement of the subframe that is present under hard acceleration and braking.

Second is our tried and true IRS Subframe Bushing Support System. This 8 piece kit was a first of its kind in the performance aftermarket and so innovative and popular we patented its design! Made in-house from billet 6061 aluminum and featuring stainless steel hardware, this kit fills all the factory voids in the IRS subframe mounting locations. Its job is to prevent up and down movements of the subframe.

The 3rd component of this kit is the strongest support brace for the Mustang IRS on the market!! Made in-house from chrome-moly steel, this brace is designed to support the factory subframe by directly tying it into the chassis at key mounting locations. Using factory mounting locations on the factory frame, this 5 point brace supports the front factory mount and the lower control arm mount as well. A simple bolt-in design, this brace ties the subframe to the chassis in the best possible way.

Steeda's Rear Toe Links are the 4th item in the kit. They help you improve your launch and allows you to control the toe of your Mustang during launches. Improve your 60-foot times and get down track faster with this upgrade from Steeda.

5th in the kit, the Steeda Billet Vertical Links with Urethane Bushings reduce deflection and tighten the rear of your Mustang. This CNC machined 6061 billet aluminum piece is a great step up over the stamped factory piece. Reducing bushing deflection will help you put more power to the ground and improve control, while also preventing unwanted movement and wheel hop. Bushing deflection from the stock rubber bushings can cause sloppy or soft handling and will hold your Ford back from reaching its full potential.

The 6th piece is Steeda's Adjustable Differential Bushing Insert System. These polyurethane bushings replace the soft rubber factory bushings that result in pinion changes, differential movement, and wheel hop. This will improve handling by helping to keep the rear of your S550/S650 connected. You can expect some increase in NVH and may experience increased transfer of gear whine noise problematic to some Super 8.8 IRS differentials.

NOTE: Coupe fitment only. Steeda IRS Subframe Support Braces will not fit convertibles. Will not fit 2024+ Mustang equipped with Brembo brakes. Kit not compatible with GT500.

Kit Includes:

• 555-5754 - Steeda IRS Subframe Support Braces
• 555-4443 - Steeda Adjustable Differential Bushing Insert System
• 555-4438 - Steeda IRS Subframe Alignment Kit
• 555-4437 - Steeda IRS Subframe Bushing Support System
• 555-4129 - Steeda Billet Aluminum Vertical Links with Urethane Bushings
• 555-4120 - Steeda Adjustable Rear Toe Links

Product Benefits:

• Eliminate wheel hop
• May increase NVH (gear noise)
• Eliminate subframe movement
• Minimizes differential movement
• Simple install
• Squares subframe to the chassis
• No permanent modifications
• More predictable handling
• Greater control and stability
• Fits 2024+ non-Brembo Pack Mustangs
• Our 2024+ HPDE build achieved over a 2-second improvement in lap times when combined with our Competition Front and Rear Sway Bar Kit

Find out which Stop The Hop Kit is best for you!

WARNING: California Residents: Cancer and Reproductive Harm; www.p65warnings.ca.gov