Sale
Supercharger Pulley (2.7'')
$445.50
Increases boost 3 psi over stock Excedes OEM Quality, with superior durability More Horsepower and Torque to the rear tires 100% made in the USA... View full product details
Steel Caster Camber Plates (3 Bolt)
$560.25
Complete adjustment of caster and camber for better al Direct bolt-in - No modifications required Teflon lined bearing never needs lubrication No interference with hoods... View full product details
Steeda S550/S650 Mustang Adjustable Front Swaybar Endlinks (2015-2024)
$391.50
Steeda's adjustable stay-bar endlinks make a great upgrade for the stock endlinks. Steeda's adjustable stay-bar endlinks make a great upgrade for the stock endlinks as... View full product details
Steeda Complete Focus ST Cold Air Intake (15-18 ST)
$620.99
Utilizes the factory cold air feed duct from the grille Replaces your entire inlet system Billet aluminum velocity stack Does not require any engine tuning... View full product details
Rear Swaybar (22.5 mm)
$380.70
Dramatically Improves Handling Easy Install - Direct Bolt in Replacement Made in The U.S.A. With Pride Steeda's 22.5 mm rear swaybar is designed for any... View full product details
ProFlow Cold Air Intake Kit Ford Mustang GT (2011-2014) Tune Required
$1,274.40
Steeda's ProFlow Cold Air Intake on an otherwise stock 2011 5.0L Coyote Mustang has achieved a blistering 1/4 mile time of 11.96 at over 115mph!... View full product details
Oil Separator
$238.95
Reduces detonation Reduces carbon deposits in the engine Easily drains Steeda's oil separator kit reduces detonation, oil burning and deposits on the valves by removing... View full product details
Lower Control Arms (Chromoly)
$548.10
Eliminates wheel hop, improves traction Lighter than stock and competitor's arms Chrome Moly Steel Construction 2x stronger than competitor's mild steel These Chrome Moly alloy... View full product details
IRS Differential Bushings
$121.50
Eliminate wheel hop Increase traction No increase in NVH No decrease in ride comfort Stop differential movement and wheel-hop with polyurethane differential bushings from Steeda.... View full product details
Adjustable Upper Control Arms (Street / Competition)
$648.00
Better handling, more stable cornering Eliminates side to slide slop in the rear end Wide adjustment range Allows for correction of pinion angle High quality... View full product details
Tubular Steel Upper Control Arms
$569.70
Super strong tig-welded construction Includes axle-end bushings Eliminates side to slide slop in the rear end Better handling, more stable cornering Steeda's Steel upper control... View full product details
Supercharger Pulley Puller
$404.99
Dramatically outlasts any other puller on the market This special tool is designed to remove and install the pulley on Ford (and Eaton) superchargers. The... View full product details
Steeda S550/S650 Mustang Adjustable Rear Swaybar Endlinks (2015-2024)
$356.40
As silent as factory units in street use Aerospace grade aluminum center adjusters Double adjustable design for adjustment without removing them from the vehicle Steeda's... View full product details
Sport Lowering Springs (Convertible)
$978.75
Approximate Drop Front: 1.2'' Approximate Drop Rear: 1.5'' Give your car that Agressive lowered stance look Maintans good ride quality for daily driving Springs are... View full product details
Power Plus Throttle Body (70 mm)
$580.49
7 to 12 Horsepower CNC machined from high quality 356 aluminum O-Ringed throttle shafts All BBK 1994-1995 Mustang GT 5.0L throttle bodies are designed to... View full product details
High-Flow H-Pipe with Cats (For Shorty/Stock Headers)
$1,400.58
Bolt-on 15-25 horsepower Retaining OEM quality and longevity Die-stamped flanges BBK Performance H pipes have been the number one performance brand that 86-93 Ford Mustang... View full product details
Heavy Duty Upper Strut Mounts
$1,516.05
+/- 1 degree of camber adjustment Precision Tolerance and Fit No suspension knockback Steeda's Upper Strut Mounts for 2011+ Mustang have been tested on several... View full product details
Cold Air Intake Kit
$823.50
Works with stock tune or custom tune Increased gas mileage Great performance 2 intake designs in one. Maximum Value Steeda's n high flow air intake... View full product details
Cold Air Induction System Chrome (96-04)
$772.19
high-flow washable conical cotton element filter aluminum inlet casting which is hand-polished All BBK "cold-air-induction" systems utilize a high-flow washable conical cotton element filter and... View full product details
Aluminum Pulley Kit (3 Piece)
$310.49
Limited 1 Year Warranty 8-15 horsepower Allow the use of existing serpentine belts Made from aircraft quality machined steel or aluminum alloy these BBK under... View full product details
Adjustable Upper Comp/Street Kit (Bushing End & HD Mount)
$936.90
Adjustable pinion angle for optimum traction Better handling with more stable cornering Chrome moly rod end and HD mount make this a bullet This upper... View full product details
Adjustable Heavy Duty Engine Mounts
$506.25
Allows for a 3/4" adjustment range Adjustable in 1/4" increments High quality billet construction 2 types of bushings for street /competition use Steeda Adjustable Motor... View full product details
Adjustable Fuel Pressure Regulator (Billet)
$387.60
Allows fuel pressure adjustment to approximately 65psi CNC machined billet aluminum Direct replacements for your stock BBK billet fuel pressure regulators are a great way... View full product details
Underdrive Pulley Kit (Polished)
$276.74
8-15 horsepower polished aluminum finish direct bolt on replacements retain full cooling and charging characteristics These BBK pulley kits are designed as direct bolt on... View full product details
Steel Lower Rear Control Arms
$711.45
Excellent for daily driving or performance use Less NVH than arms with spherical bearings 1/2 the weight of the competition's control arms Softer outer bushings... View full product details
Steel Caster Camber Plates (90-93)
$623.70
Direct bolt-in - No modifications required correct camber to eliminate excessive tire wear Increase suspension travel on lowered vehicles Teflon lined bearing never needs lubrication... View full product details
Steeda Mustang Ultralite Extreme Springs - Linear (15-17 GT/V6)
$785.70
Great ride quality, improved aerodynamics and improved vehicle stance Sharper steering response, improved vehicle handling and stability, noticeable reduction in nosedive These linear springs will... View full product details
Steeda Focus ST Oil Separator (15+ ST & RS)
$175.49
Reduces detonation, oil burning and deposits on the valves. Easy and quick installation. Increased engine component life. The Steeda Focus ST Oil Separator for 2015+... View full product details
Sport Lowering Springs (Coupe)
$976.05
Improved vehicle handling Great ride quality Improved vehicle stance Springs are the foundation of good handling. So start with the best. Our experience and expertise... View full product details
Spherical Bearings (For Upper Control Arms at Differential)
$317.25
Eliminate binding Built for hig-horsepower applications Another perfect addition to your racing suspension system. These bushings eliminate binding and allow for super high horsepower applications... View full product details
Short H-Pipe For Longtube Headers w Catalytic Converters
$1,012.49
CNC mandrel bent aluminized tubing High flow catalytic converters Used with BBK full length headers BBK Performance short mid H pipes are specifically designed to... View full product details
Rear Control Arms with Spherical Bearings (Billet Race)
$919.35
Eliminates wheel hop, improves traction Super strong billet construction Lighter than stock and competitors arms - reduced unsp When only the best will do, say... View full product details
Long Tube Headers
$1,336.49
silver polished ceramic coating 3 1.625 Each set of BBK long tube, full length headers is CAD designed and manufactured with 1 5/8" CNC mandrel... View full product details
IRS Subframe Bushings
$253.80
Improved vehicle handling Reduced wheel hop Steeda IRS Subframe bushings improve handling, reduce wheel hop, and improve tire clearance on the 1999-2004 Mustang Cobra. The... View full product details
IRS Differental Cover Brace
$484.65
Stiffens Differential Cover The Cobra IRS Differential cover is cast in aluminum, a material prized for its unique property of strength without the weight of... View full product details
Full Length Headers (Chrome)
$850.49
CNC Mandrel Bent Tubing For Unrestrictive Airflow Pressure Tested To Ensure Leak Free Performance Dyno Proven Performance Adds 15 To 20 Horsepower Easy Bolt-On Installation... View full product details
Cold Air Induction System (Chrome)
$485.99
Adds 10-15 hp Add a little style to your engine bay As one of today's favorite performance bolt-ons, cold air intake systems kits deliver great... View full product details
Blower Belt Tensioner
$357.75
Improved belt wrap for elimating belt slip Easy install Steeda's Cobra Blower Belt Tensioner creates more belt wrap around blower pulley for less belt slip... View full product details
Adjustable Street Upper Control Arm
$603.45
Adjustable pinion angle for optimum traction Better handling with more stable cornering Three piece urethane bushings for better traction Need to reduce wheel hop and... View full product details
BBK 1 5/8 Full Length Headers - Polished Ceramic (1979-1993)
Sold Out
15-20 horsepower increase 1 and 5/8th" diameter CAD designed Each set of BBK long tube, full length headers is CAD designed and manufactured with 1... View full product details
Steeda Supercharger Pulley (2.4'')
$404.99
Directly replaces factory supercharger pulley 2.4" diameter steel pulley with black coating. Up to 60 horsepower and 70 ft/lbs of torque! Increases boost by 2-3... View full product details
X-Pipe W Cats (For Shorty/Stock Headers)
$1,252.80
Limited 1 Year Warranty 15-20 horsepower depending on application. performance Xtracter center X section These BBK direct replacement 1986-93 Mustang 5.0L X-pipes feature high-flow catalytic... View full product details
Upgrade Kit For Street Upper Control Arm
$621.00
Adjustable pinion angle for optimum traction Better handling with more stable cornering Complete engineered package Steeda's new competition upper 3rd link for S197 Mustangs is... View full product details
Steeda Mustang Underdrive Pulleys (96-99 Cobra, 02 Bullitt)
$743.85
Free up valuable horsepower High quality construction Get back the power and torque your belt-driven accessories steal. Bolt on 8-10 "free" HP with Steeda's underdrive... View full product details
Two Piece Billet Idler Pulley Kit
$302.40
High quality billet aluminum construction Made in the USA Adds great looks to your engine bay! Made from billet 6061 aluminum these idler pulleys will... View full product details
Throttle Intake (78 mm)
$674.99
Add 10-15 RWHP & 10-15 RWTQ 356 aluminum castings Kit comes complete with all the necessary hardware Another Design and Patented Performance first from BBK... View full product details
Throttle body and EGR Spacer (70mm)
$607.49
Limited 1 Year Warranty 356 aluminum castings CNC machined 7-12 HP depending on vehicle and application All BBK 1986-1993 Mustang throttle bodies are designed to... View full product details
Throttle Body (70mm)
$402.29
Limited 1 Year Warranty 7-12 HP depending on vehicle and application CNC machined from high quality 356 aluminum OEM quality and fit every time All... View full product details
© 2025 Steeda. All trademarks and registered trademarks are the property of their respective owners.