Sale
Steel Caster Camber Plates (79-89)
$584.55
Adjust camber to eliminate improper tire wear Holds precise alignment in ALL driving conditions Teflon lined bearing never needs lubrication Increase suspension travel on lowered... View full product details
Steeda Mustang Upper Chassis Mount for 3rd Link (11-14)
$540.00
Adjustable axle pinion angle and anti-squat Does not require permanent modifications to car TIG welded for strength Steeda's 3rd link chassis mount allows you to... View full product details
Steeda Ford Fusion Lowering Springs (13-20)
$926.10
Better handling with more stable cornering while maintaining factory ride quality Lower more aggressive stance Good improvement in handling and noticeable reduction in nosedive Spring... View full product details
Steeda Focus ST Aluminum Cold Air Inlet Tube Intake (2015-2018)
$364.49
Replaces your entire inlet system Lightweight aluminum design Keeps the air intake temps down Direct bolt on replacement Up to 5 more horsepower above what... View full product details
Steeda Focus RS Rear Sway Bar (16+ RS)
$446.85
160% stiffer than stock sway bar Includes bushings and brackets Reduces understeer Reduces body roll Improve vehicle handling Steeda's Focus RS Rear Sway Bar for... View full product details
Steeda Billet Idler Pulleys for the 2015-2017 Mustang GT
$269.99
Made to be stronger than the OEM pulleys. Made from Aerospace grade aluminum. Made in the USA Steeda's lightweight billet aluminum idler and tensioner pulleys... View full product details
Shorty Header (1-5/8 Chrome)
$775.18
CNC mandrel bent tubing Pressure tested to ensure leak free performance Dyno tested performance ALL BBK Shorty Unequal Length Mustang Exhaust headers are manufactured with... View full product details
Rear Swaybar Hardware Kit
$278.10
This hardware kit includes the brackets needed for mounting a swaybar to the rear of your Ford Focus. It comes with both brackets and all... View full product details
ProFlow Cold Air Intake Kit
$812.70
Largest horsepower and torque gains on the market Lifetime warranty Lifetime filter can be reoiled and reused Keeps hot air out, cold air in Lightweight... View full product details
Pro-Flow Cold Air Intake
$1,073.25
Seals out hot underhood air Utilizes the factory cold air intake ducting High quality billet aluminum velocity stack Increases HP and TQ Steeda Autosports, the... View full product details
Power Plus Performance In-Line Fuel Pump System
$483.29
Guarantees plentiful fuel flow Over 50 gallons per hour capacity Easy to install package includes all hardware A must for turbo, supercharged and nitrous models... View full product details
Power Plus 70MM Throttle Body
$643.94
CNC High-Quality Construction OEM Quality Direct Bolt-On Replacement Reuses Factory O-Ring Gasket No Tuning Required All BBK throttle bodies are designed to increase airflow and... View full product details
Intake Spacer
$232.20
Solid billet aluminum construction Increased gas mileage Increased horsepower Steeda's Patented Billet Aluminum intake spacer is designed specifically for the 2005 through 2010 GT Mustang.... View full product details
Hood Strut Kit (Billet Non-Engraved)
$367.20
Creates more room to work under your hood Lightweight stylish billet aluminum No drilling or modification required for install Hood struts meet/exceed OE standards Steeda's... View full product details
Full Lenght Headers (Polished Ceramic)
$2,158.65
silver polished ceramic coating 14-22 rear wheel horsepower Each set of BBK long tube, full length headers is CAD designed and manufactured with 1 5/8"... View full product details
EGR Plate (70mm)
$161.99
Limited 1 Year Warranty 356 Aluminum Alloy BBK EGR Spacer Plates for Ford 5.0 Applications are CNC machined from high quality cast 356 Aluminum Alloy.... View full product details
Cold Air Intake (Fenderwell)
$795.14
Fenderwell inlet Washable air filter Add HP and TQ Simple installation All BBK "cold-air-induction" systems utilize a high-flow washable conical cotton element filter and most... View full product details
Cold Air Induction System (Chrome)
$449.54
real world horsepower gains hand polished and chrome plated cold air intake systems As one of today's favorite performance bolt-ons, cold air intake systems kits... View full product details
Adjustable Upper Control Arms w/ Spherical Rod Ends (Track Only)
$602.10
Better handling, more stable cornering Eliminates side to slide slop in the rear end Wide adjustment range Allows for correction of pinion angle High quality... View full product details
75MM Throttle Body
$407.69
Designed To Increase Airflow And Improve Horsepower 7-12 HP depending on vehicle and application 356 aluminum castings CNC machined All BBK 1996-2004 4.6L 2v throttle... View full product details
2015-17 Ford Mustang V6 3.7L Power+Plus Cold Air Intake Kit - BlackOut
$726.80
Want to add up to improved horsepower and torque, well you need one of our BBK Performance 2015, 2016 and 2017 Ford Mustang V6 Cold... View full product details
2011-17 Mustang 3.7L V6 Short Tuned Length 1-5/8" Exhaust Headers (Chrome)
$1,268.99
2011-17 Ford Mustang V6 owners can add additional horsepower and torque by replacing the restrictive factory cast exhaust headers with a set of these 1-5/8"... View full product details
Steeda ProFlow Mustang Cold Air Intake Kit - Automatic GT (11-14), No tune required
$1,196.10
Does not get heat soaked like factory air box Cools to ambient temperature range significantly faster than the stock unit while producing more power Allows... View full product details
X-Pipe with High Flow Cats (For Long Tube Headers)
$1,182.59
BBK X-pipes are made from 2-3/4 used with BBK full length headers View full product details
Upper Control Arm Kit (Adjustable Competition With Chassis Mount)
$900.45
Adjustable pinion angle for optimum traction Better handling with more stable cornering Complete engineered package Steeda's competition upper 3rd link for S197 Mustangs is the... View full product details
Underdrive Pulley Set
$203.84
6 To 10 Horsepower In Under 30 Minutes Retain Full Cooling And Charging Characteristics Made from aircraft quality aluminum alloy these BBK under drive front... View full product details
Underdrive Pulley Set
$215.99
8-15 horsepower allow the use of existing serpentine belts bolt on replacements Made from aircraft quality machined steel or aluminum alloy these BBK under drive... View full product details
Throttle Body (75mm)
$457.64
CNC Machined From High Quality 356 Aluminum Castings 7 to 12 Horsepower depending on vehicle and application O-Ringed throttle shafts BBK throttle bodies are designed... View full product details
Throttle Body (62mm)
$944.99
Limited 1 Year Warranty 7-12 HP depending on vehicle and application. 356 aluminum castings o ringed throttle shafts All BBK 1996-2001 Mustang Cobra throttle bodies... View full product details
Steeda Fusion Aluminum Dead Pedal (12-16)
$114.74
Premium quality aerospace aluminum Fully made in the United States Installs with basic tools Steeda's billet aluminum dead pedal for the 2013 & newer Fusion... View full product details
Steeda Focus ST Stainless Braided Clutch Line (13-16 ST)
$291.60
Improved clutch feel CNC machined OEM style fittings Includes fittings and o-rings Our simple yet effective steel braided clutch fluid line for YEARS Focus ST... View full product details
Steeda Focus ST Ram Air Intake Scoop (13-16 ST)
$323.99
Reduce air inlet temperatures Increased hp & torque Made in the USA Steeda's Focus ST Ram Air Intake Scoop for 2013-2016 Focus ST allows your... View full product details
Steeda Focus ST Front Mount Intercooler - Street/Comp (13-16 ST)
$2,056.05
Rated at up to 600 horsepower! Specially designed end tanks for maximizing efficiency Twice the capacity of your stock intercooler Comes with Steeda logo Steeda's... View full product details
Steeda Focus ST Driver Side Transmission Mount (2013 ST)
$618.30
Improved power delivery and launching Improved shifting feel Direct bolt on installation Lifetime Warranty against manufacturing defects If you are a hardcore enthusiast who races... View full product details
Steeda Focus RS Front Sway Bar (16+ RS)
$760.05
25% stiffer than stock sway bar Includes bushings and brackets Reduces understeer Reduces body roll Improve vehicle handling Steeda's Focus RS Front Sway Bar for... View full product details
Steeda Fiesta Shock Tower Brace (11-14)
$305.10
Improves chassis stiffness Made from strong chromoly steel No welding required Easy to install Made in the USA Steeda's rear shock tower brace was designed... View full product details
Steeda EcoBoost Fusion Intake Manifold Spacer (13-16)
$382.05
Perfectly matched ports for smooth transitions Increased horsepower Lifetime warranty made in the USA Steeda's Intake Runner Plate smooths air flow with CAD perfect port... View full product details
Rear Brake Upgrade (13")
$2,012.85
Increased width for better wear and cooling Large Directional cooling vents Lighter and stronger aircraft aluminum bracket Lightest rear brake upgrade kit on the market... View full product details
Steeda Functional Mustang Street Wing (1999-2000)
$607.49
High speed down force Stylish design Steeda's front air splitter enhances front down force for better handling and control and decreases air turbulence under the... View full product details
Power Plus Twin-65MM Throttle Body
$768.14
CNC High-Quality Construction OEM Quality Direct Bolt-On Replacement Reuses Factory O-Ring Gasket No Tuning Required All BBK throttle bodies are designed to increase airflow and... View full product details
Power Plus Twin-62MM Throttle Body
$796.49
CNC High-Quality Construction OEM Quality Direct Bolt-On Replacement Reuses Factory O-Ring Gasket No Tuning Required All BBK throttle bodies are designed to increase airflow and... View full product details
Power Plus Throttle Body (90mm)
$1,162.34
8-12 horsepower gain 356 aluminum casting BBK Performance Power Plus Series throttle bodies for the NEW 2011,2012 & 2013 Mustang GT, Boss 302, and 3.7L... View full product details
Oil Separator
$175.49
Reduces detonation Reduces carbon deposits in the engine Easily drains Steeda's oil separator kit reduces detonation, oil burning and deposits on the valves by removing... View full product details
Longtube Headers (Chrome)
$1,375.64
CNC Mandrel Bent Tubing For Unrestrictive Airflow Pressure Tested To Ensure Leak Free Performance Dyno Proven Performance Each set of BBK Full length long tube... View full product details
Lightweight Radiator Support
$675.00
Lightweight thin-wall tubing Optional use of swaybar or Z-brace Lower splash shield can be re-used (with zip-ties) Steeda's Lightweight Tubular Front radiator support is the... View full product details
IRS Roll Steer Kit
$342.89
Made in the United States Steeda's rear roll steer kit helps elimiate rear roll steer by correcting the bump steer geometry in the rear of... View full product details
Intake Manifold Spacer Kit (GT-40/Cobra 0.375'')
$132.29
Custom Phenolic Fiber 3/8 Affordable Bolt-On As one of the most affordable bolt-ons for today's automotive enthusiasts, bbk's phenolic manifold spacer kits have proven to... View full product details
Idler and Tensioner Pulley Kit (Billet)
$244.35
Made to be stronger then the OEM unit Made from aerospace grade aluminum Dress up your engine bay Steeda's lightweight billet aluminum idler and tensioner... View full product details
© 2025 Steeda. All trademarks and registered trademarks are the property of their respective owners.